|
Mechanical
|
|
Format
|
Standard profile, half length, 4-lane PCI Express card
|
|
Cooling method
|
Air-cooling, fanless
|
|
Mounting
|
For insertion in a standard height, 4-lane or higher, PCI Express card slot
|
|
Connectors
|
-
'A' on bracket:
-
26-position Shrunk Delta Ribbon (SDR) socket
-
Camera Link Camera A
-
'B' on bracket:
-
26-position Shrunk Delta Ribbon (SDR) socket
-
Camera Link Camera B
-
'EXTERNAL I/O' on bracket:
-
26-pin 3-row high-density female sub-D connector
-
I/O lines and power output
-
'INTERNAL I/O A on PCB:
-
26-pin 2-row 0.1" pitch pin header with shrouding
-
I/O lines of camera A and power output
-
'INTERNAL I/O B on PCB:
-
26-pin 2-row 0.1" pitch pin header with shrouding
-
I/O lines of camera B and power output
-
'POWER INPUT' on module:
-
4-pin MOLEX power socket
-
12 VDC power input for PoCL cameras and I/O power
|
|
Dimensions
|
PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
|
|
Weight
|
137 g, 4.83 oz
|
|
Host bus
|
|
Standard
|
PCI Express 1.0
|
|
Link width
|
4 lanes
|
|
Link speed
|
2.5 GT/s (PCIe 1.0)
|
|
Maximum payload size
|
1024 bytes
|
|
DMA
|
32- and 64-bit
|
|
Peak delivery bandwidth
|
1,024 MB/s
|
|
Effective (sustained) delivery bandwidth
|
-
Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing
-
Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing
-
Up to 754 MB/s for a PCI Express payload size of 128 bytes and 64-bit addressing
-
Up to 780 MB/s for a PCI Express payload size of 128 bytes and 32-bit addressing
|
|
Power consumption
|
Max.7.2 W; Typ. 6.0 W (0.47 A @ 3.3V;0.37 A @+12V)
|
|
Camera / video inputs
|
|
Interface standard(s)
|
Camera Link 2.0
|
|
Connectors
|
Two Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
|
|
ECCO - Extended Camera Link Cable Operation
|
ECCO
|
|
Number of cameras
|
Two Base or Lite cameras
|
|
Maximum aggregated camera data transfer rate
|
4.08 Gbit/s (510 MB/s)
|
|
Camera Link configuration
|
Base or Lite
|
|
Camera Link clock frequency
|
From 20 MHz up to 85 MHz
|
|
PoCL (Power over Camera Link)
|
Two independent PoCL SafePower compliant controllers with overload, over-voltage and short-circuit protection
|
|
Camera types
|
Grayscale and color (RGB and Bayer) area- and line-scan cameras
|
|
Area-scan camera control
|
|
Trigger
|
-
Precise control of asynchronous reset cameras, with exposure control.
-
Support of camera exposure/readout overlap.
-
Support of external hardware trigger, with optional delay and trigger decimation.
|
|
Strobe
|
-
Accurate control of the strobe position for strobed light sources.
-
Support of early and late strobe pulses.
|
|
Line-scan camera control
|
|
Scan/page trigger
|
-
Precise control of start-of-scan and end-of-scan triggers.
-
Support of external hardware trigger, with optional delay.
-
Support of infinite acquisition, without missing line, for web inspection applications.
|
|
Line trigger
|
-
Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
-
Rate Converter tool for fine control of the pixel aspect ratio.
-
Rate Divider tool
|
|
Line strobe
|
-
Accurate control of the strobe position for strobed light sources.
|
|
On-board processing
|
|
On-board memory
|
128 MB (64 MB for image data)
|
|
Image data stream processing
|
-
Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
|
|
Input LUT (Lookup Table)
|
-
Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 500 MPixel/s per camera
-
RGB: 3x8-bit per pixel, up to 125 MPixel/s per camera
|
|
Bayer CFA to RGB decoder
|
-
Advanced interpolation method using average and median functions on a 3x3 kernel
-
Up to 125 MPixel/s per camera
|
|
General Purpose Inputs and Outputs
|
|
Number of lines
|
2 sets of 10 I/O lines, each set including:
-
2 differential inputs (DIN)
-
4 isolated inputs (IIN)
-
4 isolated outputs (IOUT)
|
|
Usage
|
-
Each acquisition channel has a dedicated set of 10 I/O's
-
The I/O set of INTERNAL IO CONNECTOR A is dedicated to the acquisition channel of CAMERA A
-
The I/O set of INTERNAL IO CONNECTOR B is dedicated to the acquisition channel of CAMERA B
-
The input lines of an I/O set can be used by the corresponding acquisition channel as:
-
Camera frame trigger source (area-scan only)
-
Acquisition sequence trigger source (area-scan only)
-
Camera line trigger source (line-scan only)
-
Page acquisition trigger source (line-scan only)
-
Page acquisition end trigger source (line-scan only)
-
(Quadrature) motion encoder input (line-scan only)
-
The IOUT 1 output line of an I/O set can be used by the corresponding acquisition channel, as:
-
Illumination strobe output
-
All the input lines can be used as general purpose inputs
-
All the output lines can be used as general purpose outputs
|
|
Electrical specifications
|
-
DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
-
IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
-
IOUT: Isolated contact outputs compatible with 30V / 100mA loads
NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!
|
|
Filter control
|
-
Glitch removal filter available only on input lines used as trigger sources
-
Configurable with five time constants:
-
100 ns, 500 ns, and 2.5 μs for trigger / page trigger / page end trigger sources
-
40 ns, 100 ns, 200 ns, 500 ns, 1 μs, 5 μs, 10 μs for line trigger sources
|
|
Power output
|
Non-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection
|
|
Software
|
|
Host PC Operating System
|
-
Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
-
Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
|
|
APIs
|
-
MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
|
|
Environmental conditions
|
|
Operating ambient air temperature
|
0 to +50 °C / +32 to +122 °F
|
|
Operating ambient air humidity
|
10 to 90% RH non-condensing
|
|
Storage ambient air temperature
|
-20 to +70 °C/ -4 to +158 °F
|
|
Storage ambient air humidity
|
10% to 90% RH non-condensing
|
|
Certifications
|
|
Electromagnetic - EMC standards
|
-
European Council EMC Directive 2014/30/EU
-
United States FCC rule 47 CFR 15
|
|
EMC - Emission
|
-
EN 55022:2010 / CISPR 22:2008 Class B
-
EN 55032:2015 / CISPR 32:2012 Class B
-
FCC 47 Part 15 Class B
|
|
EMC - Immunity
|
-
EN 55024:2010 / CISPR 24:2010
-
EN 55035:2017 / CISPR 35:2016
-
EN 61000-4-2:2009
-
EN 61000-4-3:2006
-
EN 61000-4-4:2004
-
EN 61000-4-5:2014
-
EN 61000-4-6:2014
|
|
KC Certification
|
Korean Radio Waves Act, Article 58-2, Clause 3
|
|
Flammability
|
PCB compliant with UL 94 V-0
|
|
RoHS
|
European Union Directive 2015/863 (ROHS3)
|
|
REACH
|
European Union Regulation 1907/2006
|
|
WEEE
|
Must be disposed of separately from normal household waste and must be recycled according to local regulations
|
|
Ordering Information
|
|
Product code - Description
|
|
|
Optional accessories
|
|
